Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 
The REMEDIATE ETN comprises 10 beneficiaries (from 5 EU Member States – the UK, Ireland, Germany, Denmark, and Italy) and 15 partner organisations. The beneficiaries and partner organisations are committed to the provision of innovative research and training for more cost effective and sustainable remediation of contaminated land. It is a multidisciplinary collaboration between internationally ren ...
Voir le projet

 10

 TERMINÉ 

Multi-ObjecTive design Optimization of fluid eneRgy machines (MOTOR)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

The MOTOR project focuses on ICT-enabled design optimization technologies for fluid energy machines (FEMs) that transfer mechanical energy to and from the fluid, in particular for aircraft engines, ship propellers, water turbines, and screw machines. The performance of these machines essentially depends on the shape of their geometry, which is described by functional free-form surfaces. Even small ...
Voir le projet

 11

 TERMINÉ 
The aim of the 30-months PICASSO project is (1) to reinforce EU-US collaboration in ICT research and innovation focusing on the pre-competitive research in key enabling technologies related to societal challenges - 5G Networks, Big Data, Internet of Things and Cyber Physical Systems, and (2) to support the EU-US ICT policy dialogue by contributions related to e.g. privacy, security, internet gover ...
Voir le projet

 10

 TERMINÉ 
Nanotechnology is a key enabling technology. Still existing uncertainties concerning EHS need to be addressed to explore the full potential of this new technology. One challenge consists in the development of methods that reliably identify, characterize and quantify nanomaterials (NM) both as substance and in various products and matrices. The European Commission has recently recommended a definit ...
Voir le projet

 30

 TERMINÉ 
Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Voir le projet

 101

 TERMINÉ 

Model-based optimizing control - from a vision to industrial reality (MOBOCON)

Date du début: 1 juin 2012, Date de fin: 31 mai 2017,

"This proposal focuses on the operation of processing units in chemical and biochemical production plants. A new approach, demonstrated recently in the lab and pilot scales as being feasible, is to perform a dynamic online optimization of the plant operating parameters in order to achieve an economically optimal operation while meeting constraints on emissions, product quality and operating limits ...
Voir le projet

 2

 TERMINÉ 
SecInCoRe will design a Secure Dynamic Cloud based concept for Information, Communication and Resource Interoperability including information exchange and access to a ‘common information space’. This will be based on a pan-European disaster inventory focusing on specific artefacts of response to regional, national as well as cross European emergencies and disasters. SecInCoRe develops models for s ...
Voir le projet

 8

 TERMINÉ 

Mixed-Integer Nonlinear Optimization (MINO)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

"Complex decision making in enterprises should involve mathematical optimization methods, because a “best choice” has to be made out of a huge number of feasible options. A mathematical description of such decision processes typically involves both “continuous” and “discrete” decisions. If the latter are present, the customary modelling approach is to use integer variables, which are also used to ...
Voir le projet

 15

 TERMINÉ 

INTElligent FIXtures for the manufacturing of low rigidity components (INTEFIX)

Date du début: 1 juil. 2013, Date de fin: 30 juin 2016,

In the manufacturing industry, the machining of medium and big size parts with the required and suitable precision is a challenge, especially in high added value products manufactured in small or single-unit batches made of high performance materials like in aeronautic, space or energy sectors, where conventional process engineering and test/error methods are not completely efficient.INTEFIX aims ...
Voir le projet

 33

 TERMINÉ 
"Competitive manufacturing industry must be able to react to change and to understand the balance of possible options when making decisions on complex multi-faceted problems. Understanding how best to configure and re-configure a global production network, set against rapidly changing product-service requirements is one such complex problem area. This project aims to provide services that support ...
Voir le projet

 15

 TERMINÉ 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Date du début: 1 oct. 2013, Date de fin: 31 mars 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Voir le projet

 154

 TERMINÉ 

Coherent Information Processing in Rare-earth Ion doped Solids (CIPRIS)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,

Rare-earth ions (lanthanides) play an increasingly important role in modern optical technologies. Lanthanides are extensively used in solid-state laser physics, e.g. as key components in telecommunication networks. Rare-earths are also employed as luminescent materials in lamps or as radiation detectors in X-ray imaging. Rare-earths are already commercially omnipresent.However, the full potential ...
Voir le projet

 8

 TERMINÉ 

Robust affinity materials for applications in proteomics and diagnostics (PEPMIP)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,

"PEPMIP represents a joint European effort involving eleven partners aimed at the development of the next generation of dedicated separation materials, designed to recognize peptides and proteins, and the implementation of these materials in new high performance methods for peptide and protein analysis. Artificial receptors will be developed by various Molecular Imprinting techniques. This will be ...
Voir le projet

 11

 TERMINÉ 

Spin-Photon Angular Momentum Transfer for Quantum-Enabled Technologies (SPANGL4Q)

Date du début: 1 mars 2012, Date de fin: 31 août 2015,

The goal of this project is the development of a suite of nanophotonic devices that interface with spins, for application in quantum information and quantum-enabled classical communi-cation technologies. Our technologies will be based on electron and nuclear spins in semi-conductor quantum dots (QDs) embedded in nanophotonic devices. We will combine knowledge of the physics of semiconductor spin ...
Voir le projet

 7

 TERMINÉ 
"The proposed project “Development of a Next generation European Inland Waterway Ship and Logistics System” aims at1. developing and validating a novel container ship (hull) which will include the following TECHNICAL INNOVATIONS:a) re-design of a standard inland ship hull = increase of transport efficiency (+ 100%)b) adaptable draught = crossing below even low bridges and react to altering water-l ...
Voir le projet

 12

 TERMINÉ 

Electricity Demand and Supply Harmonizing for EVs (e-DASH)

Date du début: 1 sept. 2011, Date de fin: 30 nov. 2014,

The sustainable integration of the electric vehicles requires an intelligent charging system for the real-time\nexchange of charge related data between FEVs and the grid in order to allow the management of:\n• high-current fast-charging for large numbers of FEVs in a brand-independent way\n• price-adaptive charging/reverse-charging at optimum price for the customer\n• the real-time grid balancing ...
Voir le projet

 15

 TERMINÉ 

Highly-complex and networked control systems (HYCON2)

Date du début: 1 sept. 2010, Date de fin: 30 nov. 2014,

ICT developments both enable and also enforce large-scale, highly-connected systems in society and industry. Knowledge to cope with these emerging systems is lacking. HYCON2 will stimulate and establish the long-term integration of the European research community, leading institutions and industry in the strategic field of control of complex, large-scale, and networked dynamical systems. It will i ...
Voir le projet

 30

 TERMINÉ 
This project aims to develop and implement instruments for a continuous assessment of the ERC Starting Grants impact on funded researchers. The main item will be a panel study (standardized online interviews) which includes two waves and which is complemented by qualitative interviews and bibliometric studies (triangulation of methods) applied to second stage applicants. The first wave will take p ...
Voir le projet

 4

 TERMINÉ 
Engineers who design hard real-time embedded systems express a need for several times the performance available today while keeping safety as major criterion. A breakthrough in performance is expected by parallelising hard real-time applications. parMERASA targets a timing analysable system of parallel hard real-time applications running on a scalable multi-core processor. Several new scientific a ...
Voir le projet

 9

 TERMINÉ 
The e-SAVE project aims to contribute to an energy-efficient supply chain by providing the system, services, collaboration platform and management tools that will help companies monitor, manage and share energy use and carbon footprint data in order to support operational as well as strategic decision making and supply chain design decisions. The project will specifically focus on the consumer goo ...
Voir le projet

 11

 TERMINÉ 

ViSTA-TV - Video Stream Analytics for Viewers in the TV Industry (ViSTA-TV)

Date du début: 1 juin 2012, Date de fin: 31 mai 2014,

Live video content is increasingly consumed over IP networks in addition to traditional broadcasting. The move to IP provides a huge opportunity to discover what people are watching in much greater breadth and depth than currently possible through interviews or set-top box based data gathering by rating organizations, because it allows direct analysis of consumer behavior via the logs they produce ...
Voir le projet

 8

 TERMINÉ 
The development and implementation of bio-refinery processes is an absolute necessity and the key to meet the vision towards bio-based economy. The EuroBioRef concept is an integrated, sustainable and diversified bio-refinery involving all biomass value chain stakeholders. The latter will allow large-scale research, testing, optimisation and demonstration of processes in the production of a wide r ...
Voir le projet

 34

 TERMINÉ 

Steep subthreshold slope switches\nfor energy efficient electronics (STEEPER)

Date du début: 1 juin 2010, Date de fin: 30 nov. 2013,

Description European Union Research Initiative Aims to Increase 
Electronic Device Efficiency by 10x and Eliminate Power Consumption of Devices in Standby Mode STEEPER addresses the development of Beyond CMOS energy-efficient steep subthreshold slope transistors based on quantum mechanical band-to ...
Voir le projet

 14

 TERMINÉ 

Computational Geometric Learning (CG Learning)

Date du début: 1 nov. 2010, Date de fin: 31 oct. 2013,

High dimensional geometric data are ubiquitous in science and engineering, and thus processing and analyzing them is a core task in these disciplines. The Computational Geometric Learning project (CG Learning) aims at extending the success story of geometric algorithms with guarantees, as achieved in the CGAL library and the related EU funded research projects, to spaces of high dimensions. This ...
Voir le projet

 8

 TERMINÉ 

Flexible, Fast and Future Production Processes (F³ FACTORY)

Date du début: 1 juin 2009, Date de fin: 31 juil. 2013,

The F3 consortium’s vision is that the EU’s chemical industry’s competitive position would be strongly enhanced if it could operate modular continuous plant (F3 plant) which combines world scale continuous plant efficiency, consistency and scalability with the versatility of batch operation. Our project will deliver such a radically new production mode based on: a) Plug–and–play modular chemical ...
Voir le projet

 29

 TERMINÉ 

Embedded Optimization for Resource Constrained Platforms (EMBOCON)

Date du début: 15 janv. 2010, Date de fin: 14 juil. 2013,

There is enormous economic potential for the application of embedded optimization technologies in embedded systems design. Recent advances in the performance of embedded hardware platforms, in combination with fundamental improvements in optimization theory and algorithms, have opened the door to widespread applications over the next decade. Embedded optimization will enable huge energy and resou ...
Voir le projet

 10

 TERMINÉ 
The objective of BIOTRAINS is to deliver a trans-European network of industrially oriented white biotechnologists fully trained in the application of biocatalysis to sustainable chemical manufacturing. Their skills will be developed through a joint research programme at leading national CoE’s (Centre of Excellence) with research projects identified by internationally leading Principal Investigator ...
Voir le projet

 13

 TERMINÉ 

Effective redesign of oxidative enzymes for green chemistry (OXYGREEN)

Date du début: 1 mai 2008, Date de fin: 30 avr. 2013,

"Enzymes are extremely powerful natural catalysts able to perform almost any type of chemical reaction while being mild by nature and highly specific. In fact, the delicate functioning of enzymes forms the basis of every living creature. The catalytic potential of enzymes is more and more appreciated by the industry as many industrial processes rely on these sophisticated catalysts. However, the n ...
Voir le projet

 14

 TERMINÉ 

Initiative for Globus in Europe (IGE) (IGE)

Date du début: 1 oct. 2010, Date de fin: 30 avr. 2013,

In order to continuously support the European computing infrastructures and to exploit possible synergies, it is of crucial importance to coordinate the European Globus activities, drive forward the developments according to the requirements of the European users and to strengthen the influence of the European developers in the Globus Alliance. Topics like security or privacy, data privacy protect ...
Voir le projet

 11

 TERMINÉ 

OPTICAL TECHNOLOGIES FOR THE IDENTIFICATION OF EXPLOSIVES (OPTIX)

Date du début: 1 nov. 2008, Date de fin: 30 avr. 2013,

"Terrorism is a real and growing threat to Europe and the world, and more than 60% of the terrorist attacks are carried out by the use of Improvised Explosive Devices. Security forces demand new tools to fight against this threat and the industry is making a big effort in the last few years to provide such tools. Every year a number of new products to detect and identify concealed explosives reac ...
Voir le projet

 10

 TERMINÉ 

Emergent Connectors for Eternal Software Intensive Networked Systems (CONNECT)

Date du début: 1 févr. 2009, Date de fin: 30 nov. 2012,

The CONNECT Integrated Project aims at enabling continuous composition of networked systems to respond to the evolution of functionalities provided to and required from the networked environment. At present the efficacy of integrating and composing networked systems depends on the level of interoperability of the systems' underlying technologies. However, interoperable middleware cannot cover the ...
Voir le projet

 11

 TERMINÉ 

Foundations of XML - Safe Processing of Dynamic Data over the Internet (FOX)

Date du début: 1 mai 2009, Date de fin: 30 sept. 2012,

The web has brought fundamentally new challenges to datamanagement. The key features that distinguish web data fromtraditional database applications are its structure - usuallydescribed by mark-up languages, such as XML - and its dynamicnature. The FOX research programme will study these challenges indetail and investigate ways to master them. To this end, FOX aims at aparadigm shift in the modell ...
Voir le projet

 8

 TERMINÉ 

Continuous Annular Electro-Chromatography (CAEC)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

Capillary electrochromatography (CEC) combines the high separation efficiency of capillary electrophoresis with high performance liquid chromatography (HPLC) and provides a powerful tool for the separation of a wide range of both neutral and charged components. The proposed integration of this technology and the rotating system of annular chromatography into a continuous annular electrochromatogra ...
Voir le projet

 8

 TERMINÉ 

Single or few molecules detection by combined enhanced spectroscopies (SMD)

Date du début: 1 juil. 2009, Date de fin: 30 juin 2012,

Future breakthroughs in the understanding of fundamental biological processes causing major diseases are expected from the development of miniaturized probes or microscopes able to detect and identify a single or a small number of molecules. The SingleMoleculeDetection (SMD) proposal will develop a unique device able to perform simultaneously and in a dynamic way force and spectroscopic measuremen ...
Voir le projet

 8

 TERMINÉ 
The focus of the project MULTIFORM is on the integration and the interoperation of tools and methods based on different modelling formalisms in order to make a significant step towards integrated coherent tool support for the design of large complex controlled systems from the first concept to the implementation and further on over their entire life cycle.By addressing the issue of multi-level mul ...
Voir le projet

 10

 TERMINÉ 

Water Treatment by Molecularly Imprinted Materials (WATERMIM)

Date du début: 1 mai 2009, Date de fin: 30 avr. 2012,

The present “WATERMIM” proposal is focused on the advancement and optimization of the MIP technology in order to produce functional materials with well-defined morphologies with respect to pore structure and selectivity for water treatment applications. The project aims at the elimination of the random distribution and the uneven accessibility of receptor sites in the volume of the imprinted mater ...
Voir le projet

 10

 TERMINÉ 

ArtistDesign – Design for Embedded Systems (ArtistDesign)

Date du début: 1 janv. 2008, Date de fin: 31 mars 2012,

The ArtistDesign NoE is the visible result of the ongoing integration of a community, that emerged through the Artist FP5 Accompanying Measure and that was organised through the Artist2 FP6 NoE.The central objective for ArtistDesign is to build on existing structures and links forged in Artist2, to become a virtual Center of Excellence in Embedded Systems Design. This will be mainly achieved throu ...
Voir le projet

 38

 TERMINÉ 

Security Engineering for lifelong Evolvable Systems (SecureChange)

Date du début: 1 févr. 2009, Date de fin: 31 janv. 2012,

There is growing demand to continuously evolve systems to meet changing business needs, new regulations and policies, novel technologies and computing infrastructures.Unfortunately, the pace of required change affects our ability to ascertain and maintain the quality of a system. Our objective is thus to develop techniques and tools that ensure "lifelong" compliance to security, privacy and depe ...
Voir le projet

 16

 TERMINÉ 

Empowering the Service Economy with SLA-aware Infrastructures (SLA@SOI)

Date du début: 1 juin 2008, Date de fin: 31 juil. 2011,

Description SLA@SOI is researching the systematic management of service-oriented infrastructures on the basis of formally specified service level agreements (SLAs).  SLA@SOI is researching the systematic management of service-oriented economy likely to replace the whole product-oriented economy in ...
Voir le projet

 14

 TERMINÉ 
The European electricity system is facing major challenges to implement a strategy for a reliable, competitive and sustainable electricity supply. The development and the renewal of the transmission infrastructure are central and recognised issues in this strategy. Indeed the transmission system is a complex and strongly interconnected infrastructure that offers a wide range of benefits like relia ...
Voir le projet

 20