Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 EN COURS 

HYDROGEN MEETING FUTURE NEEDS OF LOW CARBON MANUFACTURING VALUE CHAINS (H2Future)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2021,

Under the coordination of VERBUND, VOESTALPINE, a steel manufacturer, and SIEMENS, a PEM electrolyser manufacturer, propose a 26 month demonstration of the 6MW electrolysis power plant installed at the VOESTALPINE LINZ plant (Austria). After pilot plant commissioning, the electrolyser is prequalified with the support of APG, the transmission operator of Austria, in order to provide grid-balancing ...
Voir le projet

 6

 EN COURS 

Low Emissions Intensity Lime and Cement (LEILAC)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,

LEILAC, Low Emissions Intensity Lime And Cement, will successfully pilot a breakthrough technology that will enable both Europe’s cement and lime industries to reduce their emissions dramatically while retaining, or even increasing, international competitiveness. LEILAC will develop, build and operate a 240 tonne per day pilot plant demonstrating Direct Separation calcining technology which will c ...
Voir le projet

 13

 EN COURS 
The FLEDGED project will deliver a process for Bio-based dimethyl Ether (DME) production from biomass. The FLEDGED project will combine a flexible sorption enhanced gasification (SEG) process and a novel sorption enhanced DME synthesis (SEDMES) process to produce DME from biomass with an efficient and low cost process.The primary aim of FLEDGED project is to develop a highly intensified and flexib ...
Voir le projet

 11

 EN COURS 

From residual steel gasses to methanol (FReSMe)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

The FReSMe project, From Residual Steel gases to Methanol, will produce a methanol that will be demonstrated in ship transportation. This green fuel will be produced from CO2, recovered from an industrial Blast Furnace, and H2 recovered both from the blast furnace gas itself, as well as H2 produced by electrolysis. The two different sources of H2 will enable (i) maximum use of the current residual ...
Voir le projet

 11

 TERMINÉ 

MACRO CASCADE – Cascading Marine Macroalgal Biorefinery (MACRO CASCADE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

MACRO CASCADE will prove the concept of the cascading marine macroalgal biorefinery i.e. a production platform that covers the whole technological chain for processing sustainable cultivated macro-algae biomass – also known as seaweed - to highly processed value added products. The macro-algae biorefinery will be capable of processing multiple feedstocks, by deploying a range of mechanical, phy ...
Voir le projet

 13

 TERMINÉ 

CLean INland SHipping (LIFE CLINSH)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Background Inland Waterway Transport (IWT) causes considerable emissions of the air pollutants NOx and PM10. Many European regions are struggling to tackle air quality problems, though the often expensive measures implemented to meet air quality limit values are mainly directed at industry and road transport. However, it is increasingly recognised that in ...
Voir le projet

 17

 TERMINÉ 

Keep the Energy at the right place! (EnergyKeeper)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Main idea is to allow individual users and urban communities in remote (isolated) areas to benefit from a local low carbon economy.The project will enable the communities and individual users to participate in the smart grid context, it will develop an intelligent storage solution optimizing the communities demand and supply. The solution will be scalable towards size of the community (30-10.000 h ...
Voir le projet

 10

 TERMINÉ 
MacroFuels aims to produce advanced biofuels from seaweed or macro-algae. The targeted biofuels are ethanol, butanol, furanics and biogas. The project will achieve a breakthrough in biofuel production from macroalgae by:• Increasing the biomass supply by developing a rotating crop scheme for cultivation of seaweed, using native, highly productive brown, red and green seaweeds. Combined with the us ...
Voir le projet

 11

 TERMINÉ 

Advanced biofuel production with energy system integration (Ambition)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

The ECRIA project AMBITION aims to develop a long-term joint European Community Research and Innovation Agenda on the integration of biofuels production and surplus grid electricity valorisation. AMBITION brings together eight partners from eight different countries into a European wide lasting research partnership, which is closely linked to EERA Bioenergy. The current fragmentation in energy sys ...
Voir le projet

 8

 TERMINÉ 
Medium- to large-scale bioenergy utilisation for electricity and combined industrial or district heating is predicted to increase by 160% in 2020 compared to 2010, while carbon emission quotas are becoming stricter. Finding new ways to efficiently utilise cheap and currently unused feedstocks are necessary in order to meet these challenges.Within the project Biofficiency we will investigate how to ...
Voir le projet

 11

 TERMINÉ 

Closed Loop Wind Farm Control (CL-Windcon)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

Current practice in wind turbines operation is that every turbine has its own controller that optimizes its own performance in terms of energy capture and loading. This way of operating wind farms means that each wind turbine operates based only on the available information on its own measurements. This gets the wind farm to operate in a non-optimum way, since wind turbines are not operating as pl ...
Voir le projet

 15

 TERMINÉ 
STEPWISE is a solid sorption technology for CO2 capture from fuel gases in combination with water-gas shift and acid gas removal. The main objectives of the proposed STEPWISE project is to scale up the technology for the CO2 capture from Blast Furnace Gases (BFG) with three overall demonstration goals in comparison to state-of-the-art amine-based technologies:• Higher carbon capture rate – i.e. lo ...
Voir le projet

 9

 TERMINÉ 
Both the models concerning the future climate evolution and its impacts, as well as the models assessing the costs and benefits associated with different mitigation pathways face a high degree of uncertainty. There is an urgent need to not only understand the costs and risks associated with climate change but also the risks, uncertainties and co-effects related to different mitigation pathways as ...
Voir le projet

 12

 TERMINÉ 
The 2012 Energy Efficiency Directive (EED) establishes a set of binding measures to help the EU reach its 20% energy efficiency target by 2020. Countries have also set their own indicative national energy efficiency targets. To reach these targets, EU countries have to implement energy efficiency policies and monitor their impact. The Commission has also the task of monitoring the impacts of the m ...
Voir le projet

 33

 TERMINÉ 
BUILDINTEREST will structurally improve the financeability and attractiveness of investments in renewable energy or energy efficiency in buildings by creating three national sustainable energy financing platforms. Investments in renewable energy and energy efficiency are currently sub-optimal, forming an important bottleneck for Europe to reach its 20-20-20 targets. Particularly in the building se ...
Voir le projet

 6

 TERMINÉ 

Integrated Research Programme on Wind Energy (IRPWIND)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2018,

IRPWIND is an integrated research programme that combines strategic research projects and support activities within the field of Wind Energy, with the aim of leveraging the long term European research potential. The concept behind this programme is built on the success of existing initiatives supporting the SET Plan Agenda such as the European Energy Research Alliance Joint Programme on Wind Ener ...
Voir le projet

 26

 TERMINÉ 

ASCENT - Advanced Solid Cycles with Efficient Novel Technologies (ASCENT)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2018,

"ASCENT will provide a robust proof-of-concept of three related high temperature processes; each will lead to a step-change in efficiency of carbon removal in three types of pre-combustion capture, producing the hydrogen needed for highly efficient low-carbon power production. The project brings together five small and medium enterprises preparing to launch these concepts with the support of leadi ...
Voir le projet

 18

 TERMINÉ 

FAST industrialisation by CAtalysts Research and Development (FASTCARD)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

"To meet short term European 20-20-20 objectives and long term targets of European Energy Roadmap 2050, an energy paradigm shift is needed for which biomass conversion into advanced biofuels is essential.This new deal has challenges in catalyst development which so far hinders implementation at industrial level: Firstly, biomass is much more complex and reactive than conventional feedstock; second ...
Voir le projet

 14

 TERMINÉ 
Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Voir le projet

 37

 TERMINÉ 
The accelerated development of shale gas is accompanied by growing public concern regarding the safety of shale gas extraction and its impact on human health and the environment. For the US, shale gas exploitation proved very successful in changing the energy landscape in terms of security of domestic supply and increased contribution of gas in the energy mix. For Europe, shale gas exploitation co ...
Voir le projet

 18

 TERMINÉ 

AdVanced Aerodynamic Tools for lArge Rotors (AVATAR)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

The motivation for the AVATAR project lies in the fact that upscaling wind turbine designs towards 10-20 MW requires radical innovations to make this feasible. Many of these innovationshave a strong aerodynamic component and can be considered as unconventional from an aerodynamic point of view. As such the analysis of the resulting rotor designs falls outside the validated range of applicability o ...
Voir le projet

 14

 TERMINÉ 
The overall objectives of the INNWIND.EU project are the high performance innovative design of a beyond-state-of-the-art 10-20MW offshore wind turbine and hardware demonstrators of some of the critical components. These ambitious primary objectives lead to a set of secondary objectives, which are the specific innovations, new concepts, new technologies and proof of concepts at the sub system and t ...
Voir le projet

 29

 TERMINÉ 
Solar photovoltaic (PV) technology is one of the fastest growing sustainable, renewable energy conversion technologies that can help meet the increasing global energy demands. Organic photovoltaic (OPV) technologies are particularly attractive due to their compatibility with low-cost roll-to-roll and printing processing at low temperatures on a wide variety of substrate materials and the lack of s ...
Voir le projet

 12

 TERMINÉ 
The main aim of this project is to support the sustainable delivery of non-food biomass feedstock at local, regional and pan European level through developing strategies, and roadmaps that will be informed by a “computerized and easy to use” toolset (and respective databases) with update harmonized datasets at local, regional, national and pan European level for EU27, western Balkans, Turkey and U ...
Voir le projet

 34

 TERMINÉ 

Opening bio-based markets via standards, labelling and procurement (OPEN-BIO)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

"Application of standards, certification schemes and labels has positive long-term effects on the overall development of the European bio-based product market. Good product information that presents correct claims to industry and public procurers is vital for the usage of these new products. Ensuring the sustainable sourcing of raw materials and the effective bio-content are important additional s ...
Voir le projet

 15

 TERMINÉ 
The development of hydrogen as an energy carrier will be dependent upon the capacity of the market to offer low-carbon or carbon-free hydrogen to end-users and consumers. However, the production of green hydrogen and its consumption will most likely be unbundled in order to optimize its transportation and distribution, while enabling cost adequate pricing for green hydrogen. This implies that a ro ...
Voir le projet

 4

 TERMINÉ 

new MAterials and REliability in offshore WINd Turbines technology (MARE-WINT)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

One of the strategic objectives of the industrial initiative of the SET Plan on wind energy is to reduce cost of energy by improving reliability of wind turbines and their components and optimizing operation and maintenance (O&M) strategies. Increasing reliability and optimizing O&M have a direct impact on the availability of wind turbines and thus reduce cost and increase energy output. This stra ...
Voir le projet

 13

 TERMINÉ 

A Toolbox for Offshore Wind Farm Cluster Design (CLUSTERDESIGN)

Date du début: 1 déc. 2011, Date de fin: 31 mai 2016,

Today, an offshore wind farm is merely a collection of wind turbines where the components of an offshore wind farm cluster are optimized but not the overall cluster. In the future, the best-performing wind farms will be designed with an integrated approach. For this purpose, design tools for offshore wind farm clusters must then yield for the overall optimum. This means they must integrate the clu ...
Voir le projet

 6

 TERMINÉ 
The OPTIMASH project aims to optimise the efficiency and reliability of gasifiers fuelled with high-ash content coals. High Pressure Circulating Fluidized Bed gasifiers are the target technology. The objective of this 4 years project is to develop a pilot gasifier capable of producing a syngas flow at 10 bars suitable for 1MWth. The gasification characteristics of high ash content coal will be inv ...
Voir le projet

 6

 TERMINÉ 

Logistics for Energy Crops' Biomass (LOGISTEC)

Date du début: 1 sept. 2012, Date de fin: 29 févr. 2016,

Cost-efficient, environmental-friendly and socially sustainable biomass supply chains are urgently needed to achieve the 2020 targets of the Strategic Energy Technologies-Plan of the European Union, which are likely to be impeded by the potential scarcity of lignocellulosic biomass from agriculture. Innovative techniques for crop management, biomass harvesting and pre-treatment, storage and transp ...
Voir le projet

 24

 TERMINÉ 

EERA SEcretariat 2 (EERASE2)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2016,

The European Energy Research Alliance (EERA), founded by ten leading European Research organisations in 2008, aims to strengthen and expand Europe’s capabilities in sustainable energy research by connecting and joining European energy research activities. EERA’s coordinated and streamlined efforts shall enable all to optimise energy R&D actors’ efforts and to overcome fragmentation in order to acc ...
Voir le projet

 8

 TERMINÉ 

Integrated non-CO2 Greenhouse gas Observing System (INGOS)

Date du début: 1 oct. 2011, Date de fin: 31 déc. 2015,

InGOS will support and integrate the observing capacity of Europe for non-CO2 greenhouse gases (NCGHG: CH4, N2O, SF6, H2 and halocarbons). The emissions of these gases are very uncertain and it is unknown how future climate change will feedback into the land use coupled emissions of CH4 and N2O. The NCGHG atmospheric abundances will increase further in the future and the emissions of these gases a ...
Voir le projet

 39

 TERMINÉ 
"European oceans will be subject to massive development of marine infrastructure in the near future. The most obvious is the energy facilities e.g. offshore wind farms, exploitation of wave energy, expansion of electricity connections, and also further development and implementation of marine aquaculture. This will also lead to an increased need for marine infrastructure to support installation an ...
Voir le projet

 29

 TERMINÉ 

Compact Multifuel-Energy To Hydrogen converter (CoMETHy)

Date du début: 1 déc. 2011, Date de fin: 31 déc. 2015,

Sustainable decentralized hydrogen production requires development of efficient fuel-flexible units adaptable to renewable sources.CoMETHy aims at developing a compact steam reformer to convert reformable fuels (methane, bioethanol, glycerol, etc.) to pure hydrogen, adaptable to several heat sources (solar, biomass, fossil, refuse derived fuels, etc.) depending on the locally available energy mix. ...
Voir le projet

 12

 TERMINÉ 

Modular Development Plan of the Pan-European Transmission System 2050 (e-HIGHWAY2050)

Date du début: 1 sept. 2012, Date de fin: 31 déc. 2015,

Eight Transmission System Operators (BE, CZ, FR, DE, IT, PT, CH, PL) and ENTSO-E, together with 4 associations of technology manufacturers, and 16 RTD performers propose a 3-year R&D project to develop and to apply a methodology for the long-term development of the Pan-European transmission network. The project aims at delivering a top-down methodology to support the planning from 2020 to 2050. F ...
Voir le projet

 28

 TERMINÉ 

Cradle to cradle sustainable pv modules (CU-PV)

Date du début: 1 oct. 2012, Date de fin: 31 déc. 2015,

Even though solar power is pollution-free during use, production of solar (PV) modules consumes extensive energy and natural resources. Recycling is hardly considered during module production, and therefore cumbersome and inefficient. The fast growth of the PV-industry entails similarly fast growth in resource consumption with growing production capacity: currently modest amounts can become very h ...
Voir le projet

 7

 TERMINÉ 
FERTIPLUS will identify urban and farm organic wastes that can be used to recycle nutrients into agriculture as biochar, compost or combinations of them. Urban and farm organic residues are a large source of nutrients and today not used to its full potential. FERTIPLUS will assess and use this potential and contribute to sustainable crop production and soil productivity and quality across regions ...
Voir le projet

 14

 TERMINÉ 
The overall objective of SOLARROK is to deepen the transnational cooperation between leading European research-driven clusters in the Photovoltaic (PV) sector. To gain a competitive position and to foster industrial innovation, EU research infrastructures require more and more resources: multidisciplinary competencies, investments for technical equipments, skilled human resources, and strong links ...
Voir le projet

 16

 TERMINÉ 

Smart Consumer - Smart Customer – Smart Citizen (S3C)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

The overall objective of the S3C project is to foster ‘smart’ energy behaviour of households and SMEs in Europe via active user participation. Strongly linked to European large-scale demonstration projects, the small and flexible consortium follows a human centric approach from social and behavioural sciences. It includes insights from other fields such as telecommunications, and tests different t ...
Voir le projet

 7

 TERMINÉ 

Marine Renewables Infrastructure Network for Emerging Energy Technologies (MARINET)

Date du début: 1 avr. 2011, Date de fin: 30 sept. 2015,

Offshore Renewable Conversion systems are mostly at the pre-commercial stage of development. They comprise wave energy and tidal stream converters as well as offshore wind turbines for electrical generation. These devices require research to be undertaken at a series of scales along the path to commercialization. Each technology type is currently at a different stage of development but each one al ...
Voir le projet

 29