Rechercher des projets européens

23 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Industrial scenarios for connected factories (ConnectedFactories)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

There is a consensus among industry and policymakers that Europe is currently in the middle of an industrial revolution initiated by the digitisation of industrial processes. Cyber Physical Systems (CPS), the Industrial Internet and the Internet of Things (IoT) connect people, devices, machines and enterprises like never before. For many years companies and research organisations have been address ...
Voir le projet

 16

 TERMINÉ 

Cyber Physical System based Proactive Collaborative Maintenance (MANTIS)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The overall concept of MANTIS is to provide a proactive maintenance service platform architecture based on Cyber Physical Systems that allows to estimate future performance, to predict and prevent imminent failures and to schedule proactive maintenance. Maintenance is no longer a necessary evil that costs what it costs, but an important function that creates additional value in the business proces ...
Voir le projet

 47

 TERMINÉ 

Dependable Embedded Wireless Infrastructure (DEWI)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2017,

DEWI (dependable embedded wireless infrastructure) envisions to significantly foster Europe’s leading position in embedded wireless systems and smart (mobile) environments such as vehicles, railway cars, airplanes and buildings. These environments comprise wireless sensor networks and wireless applications for citizens and professional users. Therefore the consortium introduces the concept of a “s ...
Voir le projet

 61

 TERMINÉ 

Arrowhead (ARROWHEAD)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

"Our society is facing both energy and competitiveness challenges. These challenges are tightly linked and require new dynamic interactions between energy producers and energy consumers, between machines, between systems, between people and systems, etc. Cooperative automation is the key for these dynamic interactions and is enabled by the technology developed around the Internet of Things and Ser ...
Voir le projet

 87

 TERMINÉ 

The European Platform to Promote Healthy Lifestyle and improve care through a Personal Persuasive Assistant (WITH-ME)

Date du début: 1 juin 2013, Date de fin: 30 sept. 2016,

The With-Me ecosystem consists of a collection of embedded devices including multi-purpose consumer electronics (mobile phone, computer, TV, media centres, Kinect, etc), dedicated health equipment for personal or shared use (HR monitors, activity sensors, environment sensors, exercise equipment, blood pressure, and glucose analysis devices, etc.), external information sources providing sensor inpu ...
Voir le projet

 25

 TERMINÉ 

Additive Manufacturing for Wear and Corrosion Applications (AMCOR)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

AMCOR will develop and demonstrate Laser Metal Deposition (LMD) industrial manufacturing systems for the deposition of functional graded coatings (FGM) and 3D features onto metallic components supplied by industry that are subjected to in-service wear and corrosion. This will be supported by the development, production and testing of mixed powder combinations for coatings suitability.The proposed ...
Voir le projet

 16

 TERMINÉ 

Novel Nano-enabled Energy Efficient and Safe HVAC ducts and systems contributing to an healthier indoor environment (NANO-HVAC)

Date du début: 1 sept. 2012, Date de fin: 31 août 2015,

The NANO-HVAC project concept aims at developing an innovative approach for ducts insulation while introducing new cleaning and maintenance technologies, all enabled by cost-effective application of nanotechnology. The main concepts are:1. Safe, high insulating HVAC-ducts enabling minimization of heat/cool losses: cost-effective, safe and extremely thin insulating duct layers that can be applied ...
Voir le projet

 11

 TERMINÉ 

Cycling resources embedded in systems containing Light Emitting Diodes (CYCLED)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,

The project cycLED aims at optimising the flows of resources over all life-cycle phases of Light Emitting Diodes (LED) products. The energy saving potential for LEDs is significant, and the strategic importance of the LED technology is reflected in the current and upcoming market development. However, LED-based product systems contain many resources like indium, gallium or rare earth metals. Some ...
Voir le projet

 14

 TERMINÉ 

Product Remanufacturing Service System (PREMANUS)

Date du début: 1 sept. 2011, Date de fin: 30 juin 2015,

For centuries mankind has attempted to exploit the resources available to it through the reuse of objects and artifacts. However, as wealth of modern man has grown, the financial necessity to utilize the lifetime of these objects has dramatically declined, especially in developed countries with high focus on manufacturing. The demand for new products also placed undue pressure on the world's res ...
Voir le projet

 13

 TERMINÉ 

VARiability In safety critical Embedded Systems (VARIES)

Date du début: 1 mai 2012, Date de fin: 30 avr. 2015,

"In order to succeed or even to survive, manufacturers and system integrators must be able to deliver new products with speed, diversity, high quality, and at an acceptable cost.Embedded Systems (ES) are rarely entirely conceived from scratch. Companies developing ES constantly face decisions about using and adapting existing products or product assets versus new developments. Determining the long ...
Voir le projet

 29

 TERMINÉ 

"Development of a novel, low-cost fireproof Insulation Material" (SHIELD)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2015,

"The construction industry routinely experiences environments that demand excellent insulation performance – in terms of high humidity or applications demanding high fire resistance. These environments often present complex shapes and limited and difficult to reach space for such insulation materials. Whilst many insulation materials are available commercially, few combine a wide range of high l ...
Voir le projet

 9

 TERMINÉ 

Boosting Life Cycle Assessment Use in European Small and Medium-sized Enterprises: Serving Needs of Innovative Key Sectors with Smart Methods and Tools (LCA to go)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2014,

"""LCA to go"" develops sectoral methods and tools for bio-based plastics, industrial machinery, electronics, renewable energy, sensors and smart textiles. These sectors have been chosen, as the manufacturers show a high interest in making clear the environmental benefits of their products to customers (""Green industries"") and in prioritizing so they can reduce their environmental impacts. This ...
Voir le projet

 18

 TERMINÉ 

System to significantly increase the effective yield of Calcium (and other alloying elements) in the treatment of specialty steels, while reducing impurities in the melt (HOT-WIRE)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2014,

Hotwire aims to develop a new, specially coated feed wire and dispensing system that is able to delay initial Ca core exposure from current duration of only 1.5 seconds to ~5 seconds, extend the Ca melt time (once exposed) from
Voir le projet

 7

 TERMINÉ 

Pro-active decision support for data-intensive environments (ASTUTE)

Date du début: 1 mars 2011, Date de fin: 31 mai 2014,

"ASTUTE aims at defining reference architecture for the development of HMIs, targeting proactive information retrieval and delivery based on situational context, as well influenced by information content and services, and user state information. This architecture will support the user intentions, optimizing the choices available to the user, while keeping the user in control of the situation. Veri ...
Voir le projet

 22

 TERMINÉ 

Support Action for Standardisation in Additive Manufactruring (SASAM)

Date du début: 1 sept. 2012, Date de fin: 28 févr. 2014,

SASAM's mission is to drive the growth of AM to efficient and sustainable industrial processes by integrating and coordinating Standardisation activities for Europe by creating and supporting a Standardisation organisation in the field of AM.The Additive Manufacturing (AM) concept is based on additive freeform fabrication technologies for the automated production of complex products. Additive Manu ...
Voir le projet

 18

 TERMINÉ 

Novel Technology for Low Cost Re-lining of Pipe Infrastructure (EZ-Line)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2013,

We are seeking FP7 funding towards the design and development of a trenchless pipe rehabilitation system capable of adaption to a wide range of pipe relining markets. Our aim is to meet the demands of these diverse markets providing a high performance, low maintenance solution with reduced energy usage and superior operational performance which our extensive market research has validated a signifi ...
Voir le projet

 13

 TERMINÉ 

Extended service-life and improved properties of wood products through the use of functional nanoparticles in clear coating and adhesive systems (WOODLIFE)

Date du début: 1 juin 2010, Date de fin: 31 mai 2013,

The long term objective of the WOODLIFE project is to provide coated and glued wood products with substantially improved durability for a more sustainable society. The project aims to develop new water-based clear coating systems for wood with improved UV-absorbing properties, and to develop new water-based thermoplastic wood adhesives with improved mechanical properties. The new coating and adhes ...
Voir le projet

 13

 TERMINÉ 

Enhancing Printed Electronics Applications by SMEs (CLIP)

Date du début: 1 juin 2010, Date de fin: 31 mai 2013,

The project will focus on three development aims: 1) development, formulation and feasibility assessment of several lower-cost alternatives for Silver nanoparticle based conductive inks 2) for these lower-cost inks finding alternatives for conventional screen printing, which allow digital printing combined with high resolution printing and enable contactless printing, which improves quality and re ...
Voir le projet

 18

 TERMINÉ 

Temperature Sensor Coatings for Smart Machining Tools (Turncoat)

Date du début: 1 févr. 2011, Date de fin: 31 mars 2013,

We are seeking FP7 funding for the design and development of a machining tool with a wear-resistant ceramic thin film temperature sensor, for in-situ, continuous wireless monitoring of the temperature during a machining operation. The main benefits are • machining process optimalisation • Optimal use of the tools within their temperature range resulting in increased lifetime of the tool • Detectio ...
Voir le projet

 7

 TERMINÉ 

Empowering Business Ecosystems of Small Service Enterprises to Face the Economic Crisis (eBEST)

Date du début: 1 janv. 2010, Date de fin: 31 mai 2012,

The eBEST project addresses small companies (typically with less than 50 employees) providing services to other businesses, often by subcontracting, in different industrial sectors. In general the intended service companies perform added-value activities in the intermediate phases of the value chain and/or in the repair and maintenance phases. The eBEST project strategic objective is to set-up, ex ...
Voir le projet

 16

 TERMINÉ 

CompoLight: Rapid Manufacturing of lightweight metal components (COMPOLIGHT)

Date du début: 1 nov. 2008, Date de fin: 31 oct. 2011,

The project proposes to solve identified shortcomings of Rapid Manufacturing (RM) by addressing five areas, all of which are related to design and production of lightweight metal parts. These deficiencies are: 1) lack of design rules¨for RM, which could guide the designer, 2) lack of guidelines and simulation software to support to the user in the work preparation prior to RM processing and predic ...
Voir le projet

 12

 TERMINÉ 

Sensor-Base Ultrasonic Viscosity Control for the Extrusion of Recycled Plastics (Ultravisc)

Date du début: 1 oct. 2009, Date de fin: 30 sept. 2011,

Our aim is to improve processes for the recycling of post-consumer plastic waste, using new technology to compensate for impurities and variations in the physical properties of recycled feedstock. Ultravisc will allow the production of higher grade products from recycled materials, and will reduce costs for plastics recyclers and processors, thus increasing European competitiveness. It will also p ...
Voir le projet

 8

 TERMINÉ 

EUROPEAN INDUSTRIAL BREAKTHROUGH LEADING TOWARDS AN INTEGRATED COMPETITIVE SUSTAINABLE INDUSTRY (NMP-MANUFUTURE)

Date du début: 15 sept. 2009, Date de fin: 14 mars 2011,

The project focuses essentially on integration, aiming at bringing together stakeholders and visions in different dimensions among the NMP communities and the NMP and Manufuture research communities and industrial communities. It will materialise through the organisation of an NMP-Manufuture Conference in Belgium. It will address three major objectives: the interaction, complementarities and syner ...
Voir le projet

 4