Rechercher des projets européens

14 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Microbial Desalination for Low Energy Drinking Water (MIDES)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Shortage of fresh water has become one of the major challenges for societies all over the world. Water desalination offers an opportunity to significantly increase the freshwater supply for drinking, industrial use and irrigation. All current desalination technologies require significant electrical or thermal energy, with today's Reverse Osmosis (RO) desalination units consuming electric energy of ...
Voir le projet

 12

 TERMINÉ 
The objective is to develop and integrate the most advanced critical PEMFC stack components, many from recent FCH JU programmes, into an automotive stack showing BOL performance of 1.5 W/cm2 at 0.6V,
Voir le projet

 10

 TERMINÉ 
MARS-EV aims to overcome the ageing phenomenon in Li-ion cells by focusing on the development of high-energy electrode materials (250 Wh/kg at cell level) via sustainable scaled-up synthesis and safe electrolyte systems with improved cycle life (> 3000 cycles at 100%DOD). Through industrial prototype cell assembly and testing coupled with modelling MARS-EV will improve the understanding of the age ...
Voir le projet

 17

 TERMINÉ 

Low cost flexible integrated composite process (LOWFLIP)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Fibre-reinforced polymer composite materials are leading candidates as component materials to improve the efficiency and sustainability of many transport modes. The advantages of high performance composites are numerous: they include lighter weight, the ability to tailor lay-ups for optimum strength and stiffness, improved fatigue life, corrosion resistance and, with good design practice, reduced ...
Voir le projet

 11

 TERMINÉ 

Stable Interfaces for Rechargeable Batteries (SIRBATT)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

SIRBATT (Stable Interfaces for Rechargeable Batteries) is a multisite collaborative project consisting of 12 full partners from the European Area (6 Universities, 1 Research Institute and 5 industrial partners). Collaboration with leading battery research groups in the USA and Japan is also considered. The diversity of the research organisations in the partnership has been chosen to provide a wide ...
Voir le projet

 13

 TERMINÉ 
"Lightweight ceramics and fibre reinforced ceramic composites, such as non-oxide Ceramic Matrix Composites (CMCs) and Expanded Graphite (EG), represent very promising solutions for high temperature applications in strategic industrial sectors, such as transport and energy. In fact, these materials are one of topical priorities of the European Technology Platform EuMAT and a strategic issue of the ...
Voir le projet

 21

 TERMINÉ 
The prime focus of IMMEDIATE is to develop high performing MEAs aimed for automotive applications through material R&D & process optimisation. The technical targets aimed in IMMEDIATE are addressing the JTI targets for automotive MEAs with respect to performance & cost. The proposed project is a continuation of the recently terminated and very successful FP6 R&D-project: IPHE-GENIE. The IMMEDIATE ...
Voir le projet

 9

 TERMINÉ 
Air-conditioning is a rapidly growing electrical end-use in EU. A/C systems reduce temperature of the ambient air while removing humidity. However such combined air conditioning/dehumidification is generally inefficient. A promising approach is represented by Hybrid Liquid Desiccant (HLD) systems, where the latent load is removed by a liquid desiccant dehumidifier, while the sensible load is remov ...
Voir le projet

 12

 TERMINÉ 
...rtise to reach the project targets: INPT: two-phase modelling, PSI: X-Ray visualisation, JRC: modelling and tests, CEA: performance modelling, tests and modification of GDL, DLR: characterization, SGL: manufacturing performing GDL, and NEDSTACK: stack tests for automotive and back-up application."
Voir le projet

 7

 TERMINÉ 
Natural phosphate sources low in heavy metals are getting scarce. Containing about 15 mass-% of P2O5, sewage sludge ash can be considered a secondary phosphorus (P-) source. The P-content in the European sewage sludge could currently replace roughly 15% of the phosphate imports into the EU.Hence already for many years, almost decades, it has been tried to recover phosphorus from sewage, sludge and ...
Voir le projet

 11

 TERMINÉ 
In line with the Sustainable Nuclear Energy Technology Platform (SNETP) Strategic Research Agenda (SRA) and Deployment Strategy (DS), the ARCHER project will extend the state-of-the-art European (V)HTR technology basis with generic technical effort in support of nuclear cogeneration demonstration.The partner consortium consists of representatives of conventional and nuclear industry, utilities, Te ...
Voir le projet

 34

 TERMINÉ 
"Gas-Cooled Reactors (GCR), RBMK and some Material Test Reactors (MTR) make use of graphite as moderator of the fuel, structures of the core and/or thermal columns. During operation, the graphite and other carbonaceous materials like carbon brick, pyrocarbon and silicon carbide coatings are contaminated by fission products and neutron activation. These irradiated carbonaceous wastes are problemati ...
Voir le projet

 30

 TERMINÉ 
...The partnership includes two Universities (POLITO-I, TUBAF-D), two research centres (CEA-F, PISAS-SK), three SMEs (Astrarefrigeranti-I, Nanocyl-B, Starom-RO) and two large companies (Simona-D, SGL Carbon-D) selected for their specific expertise to undertake the above challenges.
Voir le projet

 10

 TERMINÉ 
"The main objective of the planned project DECODE is to increase the life-time of fuel cells for automotive applications. It is well-known that liquid water plays a crucial role in the degradation processes of fuel cells. However, this specific degradation influence is not addressed sufficiently in the present research and development efforts. Therefore, DECODE aims at identifying characteristic b ...
Voir le projet

 12