Rechercher des projets européens

13 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Development of an integrated approach based on validated and standardized methods to support the implementation of the EC recommendation for a definition of nanomaterial (NANODEFINE)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

Nanotechnology is a key enabling technology. Still existing uncertainties concerning EHS need to be addressed to explore the full potential of this new technology. One challenge consists in the development of methods that reliably identify, characterize and quantify nanomaterials (NM) both as substance and in various products and matrices. The European Commission has recently recommended a definit ...
Voir le projet

 30

 TERMINÉ 

Pilot manufacturing line for production of highly innovative materials (PILOTMANU)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

The vision of PilotManu is the upscale of the current mechanical alloying technological facility into a powder manufacturing pilot line by further developing existing IPR-covered results owned by the SMEs in the consortium related to mechanical alloying technology and to innovative powder materials for different applications.The baseline technology that will be upscaled from a technological facili ...
Voir le projet

 10

 TERMINÉ 

SUSTAINABLE NANOTECHNOLOGIES (SUN)

Date du début: 1 oct. 2013, Date de fin: 31 mars 2017,

SUN (Sustainable Nanotechnologies) is the first project addressing the entire lifecycle of nanotechnologies to ensure holistic nanosafety evaluation and incorporate the results into tools and guidelines for sustainable manufacturing, easily accessible by industries, regulators and other stakeholders. The project will incorporate scientific findings from over 30 European projects, national and inte ...
Voir le projet

 38

 TERMINÉ 

A FAST process and production system for high-throughput, highly flexible and cost-efficient volume production of miniaturised components made of a wide range of materials (Micro-FAST)

Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,

The aim of the project is to develop a completely new manufacturing system for the volume production of miniaturised components by overcoming the challenges on the manufacturing with a wide range of materials (metallic alloys, composites, ceramics and polymers), through: (i) developing a high-throughput, flexible and cost-efficient process by simultaneous electrical-forming and electric-fast-sinte ...
Voir le projet

 17

 TERMINÉ 

Multifunctional facades of reduced thickness for fast and cost-effective retrofitting (MF-RETROFIT)

Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,

The project aims to deal with the numerous requirements of facade panel retrofitting by developing a light-weight, durable, cost effective and high performance panel. Its layered structure allows for separate but also synergistic function regarding high thermal and acoustic insulation, excellent mechanical properties, up to standards flame retardancy and photocatalytic activity. Employing nanofill ...
Voir le projet

 10

 TERMINÉ 

Oxide Dispersion Strengthened Materials for the Additive Manufacture of High Temperature Components in Power Generation (OXIGEN)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

OXIGEN will combine leading-edge European expertise in the manufacture of specialist powder alloys (Mechanical Alloying), knowledge of niche high-temperature materials and capabilities in additive manufacturing. This will produce an integrated, world-leading capability to directly manufacture from powder to part custom-designed, best-in-class high temperature alloys for power generation component ...
Voir le projet

 11

 TERMINÉ 

High energy density Mg-Based metal hydrides storage system (EDEN)

Date du début: 1 oct. 2012, Date de fin: 30 juin 2016,

EDen aims at building a forefront scientific, technological and industrial expertise in energy storage and recovery system. In the past years hydrogen has been indicated as an advantageous energy carrier under many points of view, mainly environment preservation and high energy density.The necessity of hydrogen on specific mobile applications and energy backup system is promoted by the growing dem ...
Voir le projet

 7

 TERMINÉ 

Ultrasensitive plasmonic detection of single nanoparticles (NANODETECTOR)

Date du début: 1 juin 2012, Date de fin: 30 nov. 2015,

Controlled or uncontrollabel disposing of nanoparticles in various components of man made or biological matter, may have wanted or undesired consequences. Developing the diagnostic tools to detect and characterize the ’grey goo’ is one of the challeneges of nanotech-era. A development of general technology for detection and analysis of single nanoparticles in complex environment and a development ...
Voir le projet

 11

 TERMINÉ 

Nano-materials for the conservation and preservation of movable and immovable artworks (NANOFORART)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,

The main objective of the NANOFORART proposal is the development and experimentation of new nano-materials and responsive systems for the conservation and preservation of movable and immovable artworks.While the progress in material science has generated sophisticated nanostructured materials, conservation of cultural heritage is still mainly based on traditional methods and conventional materials ...
Voir le projet

 16

 TERMINÉ 

NANO/MICRO INTEGRATION IN MICROMANUFACTURING (NANOMICRO)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2013,

The new high productive platform for 3D main objective of NANOMICRO project is to provide the manufacturing industry with an entirely nanomicromanufacturing platform, by way of a new micron scale resolution and an innovative direct parallel-deposition process. The process will be able to deliver a layer wise manufacturing approach using highly focalized powder/heat fluxes, with dimensions in the ...
Voir le projet

 12

 TERMINÉ 

SUPERSONIC DEPOSITION OF NANOSTRUCTURED SURFACES (SUPERSONIC)

Date du début: 1 déc. 2009, Date de fin: 30 nov. 2013,

"The basic scientific and technological concept of the project is to use agglomerated nanophased powders to be transferred onto a substrate in the form a coating with very little or none change of crystal structure. This will allow to obtain nano-structured coatings with a crystal size very close to the powder one. The concept will be extended to an important breakthrough concept that is the “Sup ...
Voir le projet

 12

 TERMINÉ 

Development of a novel and cost-effective range of nanotech improved coatings to substantially improve NIR (Near Infrared Reflective) properties of the building envelope (COOL-Coverings)

Date du début: 1 juin 2010, Date de fin: 31 mai 2013,

Recent work has shown the possibility to drastically increase the reflection performance of the building envelop, using nanotechnologies. Standard metal oxides are already known for their solar reflection properties, but latest developments identified that nanotechnologies can improve Index of Reflectance from an average of 0,35 to 0,85 because of their effectiveness on Near Infrared wavelengths, ...
Voir le projet

 14

 TERMINÉ 

STEP UP IN POLYMER BASED RM PROCESSES (STEPUP)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2012,

An innovative mechano-chemical approach (based on the high energy ball milling) will be used for the development of innovative nanopolymers to be used in Rapid Manufacturing (RM) based on Selective Laser Sintering (SLS),by: 1.Structural modification (up nanopolymers stage) using a currently widely used polymer like Polyammide PA (a “nanoPA” will be produced); 2.Alloying (at nanoscale) with differe ...
Voir le projet

 7