Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

QuantERA ERA-NET Cofund in Quantum Technologies (QuantERA)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2021,

QuantERA ERA-NET Cofund in Quantum TechnologiesQuantum Technologies (QT) has become a new and fast developing area of research initiated by a realisation that quantum physics opens up radically new modes of quantum information processing and communication. European researchers have been at the forefront of these developments delivering many groundbreaking scientific results and advancing technolog ...
Voir le projet

 31

 TERMINÉ 

GaN densily integrated with Si-CMOS for reliable, cost effective high frequency power delivery systems (GaNonCMOS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Power electronics is the key technology to control the flow of electrical energy between source and load for a wide variety of applications from the GWs in energy transmission lines, the MWs in datacenters that power the internet to the mWs in mobile phones. Wide band gap semiconductors such as GaN use their capability to operate at higher voltages, temperatures, and switching frequencies with gr ...
Voir le projet

 11

 TERMINÉ 

Water Works 2016-2020 in Support of the Water JPI (WaterWorks2015) - Sustainable water use in agriculture, to increase water use efficiency and reduce soil and water pollution (WaterWorks2015)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,

The WaterWorks2015 proposal responds to the Horizon 2020 (H2020) Societal Challenge 5 2015 Call topic Water-3 [2015]: Stepping up EU research and innovation cooperation in the water area.WaterWorks2015 aims at pooling resources from the 32 participating research programme owners / managers of 23 countries to implement a joint call for proposals, with EU co-funding in the area of sustainable water ...
Voir le projet

 31

 TERMINÉ 

Fishfriendly Innovative Technologies for Hydropower (FIThydro)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

FIThydro addresses the decision support in commissioning and operating hydropower plants (HPP) by use of existing and innovative technologies. It concentrates on mitigation measures and strategies to develop cost-efficient environmental solutions and on strategies to avoid individual fish damage and enhancing population developments. Therefore HPPS all over Europe are involved as test sites. The f ...
Voir le projet

 26

 TERMINÉ 

Optimised Real-world Cost-Competitive Modular Hybrid Architecture for Heavy Duty Vehicles (ORCA)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

The ORCA Project proposal addresses topic GV-03-2016, of the Transport Work Programme. The work proposed will, in a single coordinated project, address all the aspects of the domain 2 “For pure and plug-in hybrids, power-train system integration and optimisation through the re-use of waste heat, advanced control, downsizing of ICEs, innovative transmissions and the integration of electronic compon ...
Voir le projet

 11

 TERMINÉ 

SPECTORS

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

SPECTORS is een Nederlands-Duits Hightech initiatief dat het marktpotentieel van civiele dronetechnologie ontsluit door sensorinnovaties ten behoeve van remote-sensing en –monitoring. De civiele markt voor het gebruik van drones en de hieraan verbonden sensortechnologie voor remote-sensing, remote-monotoring, filmproductie en landbouw is immens. Het US-portaal Business Insider schat het marktpote ...
Voir le projet

 31

 TERMINÉ 

HOLIstic optimisation of SHIP design and operation for life cycle (HOLISHIP)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Voir le projet

 39

 TERMINÉ 

BRIdges the GAp for Innovations in Disaster resilience (BRIGAID)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2020,

Recent studies from the IPCC indicate that Europe is particularly prone to increased risks of river and coastal floods, droughts resulting in water restrictions and damages from extreme weather such as heat events and wildfires. Evaluations also show a huge potential to reduce these risks with novel adaptation strategies. Researchers, innovators and incubators develop innovative products and servi ...
Voir le projet

 24

 TERMINÉ 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Voir le projet

 15

 TERMINÉ 

Analysis System for Gathered Raw Data (ASGARD)

Date du début: 1 sept. 2016, Date de fin: 29 févr. 2020,

ASGARD has a singular goal, contribute to Law Enforcement Agencies Technological Autonomy and effective use of technology. Technologies will be transferred to end users under an open source scheme focusing on Forensics, Intelligence and Foresight (Intelligence led prevention and anticipation). ASGARD will drive progress in the processing of seized data, availability of massive amounts of data and ...
Voir le projet

 34

 TERMINÉ 

PROMOTioN - Progress on Meshed HVDC Offshore Transmission Networks (PROMOTION)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

In order to unlock the full potential of Europe’s offshore resources, network infrastructure is urgently required, linking off-shore wind parks and on-shore grids in different countries. HVDC technology is envisaged but the deployment of meshed HVDC offshore grids is currently hindered by the high cost of converter technology, lack of experience with protection systems and fault clearance componen ...
Voir le projet

 35

 TERMINÉ 

Energy for Smart Objects (EnSO)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The goal of EnSO is to develop and consolidate a unique European ecosystem in the field of autonomous micro energy sources (AMES) supporting Electronic European industry to develop innovative products, in particular in IoT markets. In summary, EnSO multi-KET objectives are:• Objective 1: demonstrate the competitiveness of EnSO energy solutions of the targeted Smart Society, Smart Health, and Smart ...
Voir le projet

 36

 TERMINÉ 

wer-to-fleX (Power-to-fleX)

Date du début: 1 avr. 2016, Date de fin: 30 oct. 2019,

In Noordwest-Duitsland en Noord-Nederland is de afgelopen jaren volop ingezet op duurzame energie. Het nadeel van zon en wind als energiebron is dat het aanbod ervan fluctueert en niet gelijk loopt met de energievraag. Het bufferen van deze elektriciteit (Power) in een andere energiedrager, zoals water-stofgas, methaan, methanol, warmte of batterij (X) is een oplossing voor dit probleem. Het doel ...
Voir le projet

 19

 TERMINÉ 

ENgineering COMPASS (ENCOMPASS)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

The ENCOMPASS project principally aims to create a fully digital integrated design decision support (IDDS) system to cover the whole manufacturing chain for a laser powder bed fusion (L-PBF) process encompassing all individual processes within in. The ENCOMPASS concept takes a comprehensive view of the L-PBF process chain through synergising and optimising the key stages. The integration at digita ...
Voir le projet

 11

 TERMINÉ 

Polygon scanner based ultra-short pulse laser processing in roll-to-roll manufacturing (PoLaRoll)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Roll-to-roll manufacturing is well established in many segments like electronics, micro manufacturing or solar technology. Continuous roll-to-roll manufacturing processes can be integrated with various manufacturing steps within the production line. While many conventional and laser manufacturing techniques could already be embedded successfully into roll-to-roll machines, pulsed laser structuring ...
Voir le projet

 7

 TERMINÉ 

MOdel based coNtrol framework for Site-wide OptmizatiON of data-intensive processes (MONSOON)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

The MONSOON vision is to provide Process Industries with dependable tools to help achieving improvements in the efficient use and re-use of raw resources and energy.MONSOON aims at establishing a data-driven methodology supporting the exploitation of optimization potentials by applying multi-scale model based predictive controls in production processes.MONSOON features harmonized site-wide dynamic ...
Voir le projet

 11

 TERMINÉ 

Smart and adaptive interfaces for INCLUSIVE work environment (INCLUSIVE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

The market demands flexible productions lead to complexification of production systems and hence to more articulated Human Machine Interface (HMI). This new features tend to exclude from working environment elderly people who, even if they have a great experience, feel uncomfortable in the interaction with a complex computerized system. Moreover, complex HMI creates a barrier to young inexperience ...
Voir le projet

 11

 TERMINÉ 

Next generation urban mining - Automated disassembly, separation and recovery of valuable materials from electronic equipment (ADIR)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

Specific raw materials become increasingly important to manufacture high level industrial products. Especially electronic equipment contains precious metals and a series of strategic raw materials. To date the material specific recycling is focused on mass stream concepts such as shredder processes and metallurgy to extract the high-value metallic constituents, i.e. copper, gold, silver. However, ...
Voir le projet

 10

 TERMINÉ 

Intelligent Innovative Smart Maintenance of Assets by integRated Technologies (IN2SMART)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

IN2SMART represents the 1st proposal of the Shift2Rail members referred, according to MAAP, to the following Technology Demonstrators (TDs): TD3.7 Railway Information Measuring and Monitoring System (RIMMS), TD3.6 Dynamic Railway Information Management System (DRIMS) and TD3.8 Intelligent Asset Management Strategies (IAMS). These TDs will deploy an overall concept for Intelligent Asset Management ...
Voir le projet

 22

 TERMINÉ 

LNG PILOTS

Date du début: 15 janv. 2016, Date de fin: 30 juin 2019,

De introductie van LNG als nieuwe brandstof en energiebron voor de industrie brengt een onder-zoeks- en ontwikkelingsbehoefte met zich mee. Investeringen op dit gebied zullen de kwaliteit van de regionaal gevestigde onderzoeksinstellingen ten goede komen en de vestiging van hoogwaardige technologische ondernemingen op het gebied van logistiek, voertuigbouw, scheepsbouw, energietechniek en energiev ...
Voir le projet

 36

 TERMINÉ 

Net-shape joining technology to manufacture 3D multi-materials components based on metal alloys and thermoplastic composites (ComMUnion)

Date du début: 1 déc. 2015, Date de fin: 31 mai 2019,

ComMUnion enables productive and cost effective manufacturing of 3D metal/ Carbon Fibre Reinforced Thermoplastic (CFRT) multi-material components.ComMUnion will develop a novel solution combining tape placement of CFRTs with controlled laser-assisted heating in a multi-stage robot solution. High-speed laser texturing and cleaning will overcome the limitations of current joining technology to provi ...
Voir le projet

 15

 TERMINÉ 

Rf Engineered substrates to FostER fEm performaNCE (REFERENCE)

Date du début: 1 déc. 2015, Date de fin: 31 mai 2019,

The REFERENCE project aims to leverage a European leading edge Radio Frequency (RF) ecosystem based on RF Silicon On Insulator (SOI) disruptive technology, perceived as the most promising to address performance, cost and integration needs for RF Front End Modules (FEMs)s.The project targets to develop over the next 3 years, innovative solutions from material, engineered substrates, process, design ...
Voir le projet

 18

 TERMINÉ 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Voir le projet

 76

 TERMINÉ 

Competitive SolAr Power Towers – CAPTure (CAPTure)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

The main objective of this project is to significantly reduce costs of concentrated solar power, in order to pave the way for its deserved competitiveness on the power market. Specifically, the solar-to-electric conversion efficiency of the plant will be improved by increased receiver operating temperatures as well as an innovative power cycle configuration also providing advantages regarding plan ...
Voir le projet

 16

 TERMINÉ 

Symbiotic Human-Robot Collaborative Assembly: Technologies, Innovations and Competitiveness (SYMBIO-TIC)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2019,

The European robotics industry is moving towards a new generation of robots, based on safety in the workplace and the ability to work alongside humans. This new generation is paramount to making the factories of the future more cost-effective and restoring the competitiveness of the European manufacturing industry. However, the European manufacturing industry is facing the following challenges: (1 ...
Voir le projet

 18

 TERMINÉ 

Detecting and ANalysing TErrorist-related online contents and financing activities (DANTE)

Date du début: 1 sept. 2016, Date de fin: 28 févr. 2019,

Money underpins all terrorist activities (without money propaganda, training, recruitment, and support are less effective or null). The disruption of terrorist financing activity is a key element in any fight against terrorism.DANTE will deliver effective, efficient and automated data mining, analytics solutions and an integrated system to detect, retrieve, and analyse huge amounts of heterogeneou ...
Voir le projet

 18

 TERMINÉ 

Turning waste from steel industry into a valuable low cost feedstock for energy intensive industry (RESLAG)

Date du début: 1 sept. 2015, Date de fin: 28 févr. 2019,

The RESLAG project proposal is aligned with the challenges outlined in the call WASTE-1-2014: Moving towards a circular economy through industrial symbiosis. In 2010, the European steel industry generated, as waste, about 21.8 Mt of steel slag. The 76 % of the slag was recycled in applications such as aggregates for construction or road materials, but these sectors were unable to absorb the total ...
Voir le projet

 22

 TERMINÉ 

A novel process for manufacturing complex shaped Fe-Al intermetallic parts resistant to extreme environments (EQUINOX)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2019,

There is a need to find solutions to replace Critical Raw Materials (CRMs) such as Chromium, Nickel, Molybdenium and Vanadium in high volume end consumer products. Steels and superalloys with considerable amounts of these CRMs are widely used in many industrial applications, particularly under extreme conditions where corrosion and wear resistance are needed. It is generally accepted, that interme ...
Voir le projet

 11

 TERMINÉ 

MinWaterCSP - Minimized water consumption in CSP plants (MinWaterCSP)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

MinWaterCSP addresses the challenge of significantly reducing the water consumption of CSP plants while maintaining their overall efficiency. Its objective is to reduce evaporation losses and mirror cleaning water usage for small- and large-scale CSP plants through a holistic combination of next generation technologies in the fields of i) hybrid dry/wet cooling systems ii) wire structure heat tran ...
Voir le projet

 12

 TERMINÉ 

Flexible production cell for Hybrid Joining (FlexHyJoin)

Date du début: 1 oct. 2015, Date de fin: 31 déc. 2018,

Multimaterial systems combining metals with thermoplastic fiber reinforced polymer composites (TP-FRPC) are the key for light weight design in the automotive industry. However, the joining of the material partners remains main issue. Currently, no approach exists which sufficiently meets the three core requirements: weight neutrality, cost- and time efficiency and bonding strength. Technologies li ...
Voir le projet

 10

 TERMINÉ 

Energy and economic efficiency for today’s smart communities through integrated multi storage technologies (NETFFICIENT)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

The project will deploy and demonstrate local storage technologies which have reached TRL 5-6 in a real electrical grid, and will develop ICT tools to exploit the synergies between them, the smart grid and the citizens. The demonstration in this real environment will be driven by five use cases covering low voltage and medium voltage scenarios and a wide range of applications and functionalities. ...
Voir le projet

 14

 TERMINÉ 

Flexible and Mobile Economic Processing Technologies (FAME)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

FAME aims to increase the competiveness of the mining of European mineral resources and to stimulate more private engagement and investment and thus business development with the potential to maintain and create high quality jobs within the EU28. The focus and a principal aim is to enhance mineral processing and mining skills within Europe. A medium to long term aim is to reduce the reliance of Eu ...
Voir le projet

 18

 TERMINÉ 

Bringing FIWARE to the NEXT step (FI-NEXT)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2018,

Digital technologies underpin innovation and competitiveness across a broad range of market sectors. A key technology to boost such innovation and competitiveness is represented by the full and wide adoption of Open Service Platforms. In fact, they will allow increased competition and market penetration because they should be built on top of royalty-free open specifications, adopting open source r ...
Voir le projet

 16

 TERMINÉ 

Business Experiments in Cyber Physical Production Systems (BEinCPPS)

Date du début: 1 nov. 2015, Date de fin: 31 oct. 2018,

BEinCPPS Innovation Action aims to integrate and experiment a CPS-oriented Future Internet-based machine-factory-cloud service platform firstly intensively in five selected Smart Specialization Strategy Vanguard regions (Lombardia in Italy, Euskadi in Spain, Baden Wuertemberg in Germany, Norte in Portugal, Rhone Alpes in France), afterwards extensively in all European regions, by involving local c ...
Voir le projet

 23

 TERMINÉ 

Securing Critical Energy InfrastructuresSUCCESS - Securing Critical Energy Infrastructures (SUCCESS)

Date du début: 1 mai 2016, Date de fin: 31 oct. 2018,

Living in a safe and secure society is a fundamental human need. The security of critical infrastructures must be maintained so that supplies of power, water or other resources are secured. Modern critical infrastructures are increasingly complex and they are turning into Cyber-Physical Infrastructures because ICT is growing in importance in infrastructure management.The SUCCESS project will dev ...
Voir le projet

 19

 TERMINÉ 

Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling 2 (Fortissimo 2)

Date du début: 1 nov. 2015, Date de fin: 31 oct. 2018,

Fortissimo 2 will drive the uptake of advanced modelling, simulation and data analytics by European engineering and manufacturing SMEs and mid-caps. Such an uptake will deliver improved design processes, better products and services, and improved competitiveness. For the European Union as a whole this means improved employment opportunities and economic growth.The importance of advanced ICT to the ...
Voir le projet

 38

 TERMINÉ 

MIND

Date du début: 31 juil. 2015, Date de fin: 31 août 2018,

Zowel in Duitsland als in Nederland is de Life Science & Health sector een innovatieve sector met veel groeipotentieel voor de toekomst. Daarbij heeft de zorg ook te maken met grote maatschappelijke uitdagingen. Denk bijvoorbeeld aan de vergrijzing en nieuwe ziektebeelden. In het Duits- Nederlandse grensgebied is veel kennis op het gebied van Life Science & Health. Er zijn in beide landen verschil ...
Voir le projet

 29

 TERMINÉ 

JOINing of copper to aluminium by ElectroMagnetic fields (JOIN-EM)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

Global trends force industry to manufacture lighter, safer, more environmentally-friendly, more performant, and cheaper products. Due to its excellent thermal and electrical conductivity, copper is widely used in heating and cooling equipment and electrical devices. The rising demand caused the copper price to increase significantly.Solving the conflict between the technological benefits arising f ...
Voir le projet

 15

 TERMINÉ 

adaptive model-based Control for laser-assisted Fibre-reinforced tape winding (ambliFibre)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

ambliFibre will develop and validate the first intelligent model-based controlled laser-assisted tape winding system for fibre-reinforced thermoplastic (FRP) components. This system will include optical non-contact monitoring and innovative Human-Machine-Interfaces, which are easily manageable for the worker. Based on thermal and optical models embedded into integral process simulation tools combi ...
Voir le projet

 12

 TERMINÉ 

Computer Aided Technologies for Additive Manufacturing (CAxMan)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

The objectives of Computer Aided Technologies for Additive Manufacturing (CAxMan) are to establish Cloud based Toolboxes, Workflows and a One Stop-Shop for CAx-technologies supporting the design, simulation and process planning for additive manufacturing. More specifically the objectives are to establish analysis-based design approaches with the following aims:-To reduce material usage by 12% thro ...
Voir le projet

 13