Rechercher des projets européens

29 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry (CHEETAH)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Voir le projet

 37

 TERMINÉ 

Production and Reliability Oriented SOFC Cell and Stack Design (PROSOFC)

Date du début: 1 mai 2013, Date de fin: 31 oct. 2017,

This project aims at improving the robustness, manufacturability, efficiency and cost of SOLIDpower’s state-of-the-art SOFC stacks so as to reach market entry requirements. We propose a focused project addressing the key issues that have manifested themselves in the course of the ongoing product development efforts at SOLIDpower SA. The key issues are the mechanical robustness of solid oxide fuel ...
Voir le projet

 10

 TERMINÉ 

Graded Membranes for Energy Efficient New Generation Carbon Capture Process (GREEN-CC)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

Major sources for human made CO2 emissions comprise the energy and the industrial sector including cement production. One of the most appropriate concepts to capture CO2 from such point sources is the oxyfuel combustion. The main energy demand for this method results from the O2 generation, which is usually done by air liquefaction. This energy demand can substantially be lowered using thermally i ...
Voir le projet

 14

 TERMINÉ 

Self-Healing Thermal Barrier Coatings (SAMBA)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

"This project deals with the creation of a new, unique self-healing thermal barrier coating (TBC) for turbines and other thermally loaded structures in order to realize a significant extension of the lifetime of critical high-temperature components. The concept is based on novel Al2O3 coated Mo-Si particles embedded in the TBC layer, typically consisting of yttria-stabilised zirconia. As the curre ...
Voir le projet

 9

 TERMINÉ 

A European Platform for Translational Cancer Research (EUROCANPLATFORM)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2016,

Europe has a number of advantages as regards developing translational cancer research, yet there is no clear European strategy to meet the increasing burden posed by cancer. The FP6 Eurocan+Plus project analysed the barriers underlying the increasing fragmentation of cancer research and stressed the need to improve collaboration between basic/preclinical and comprehensive cancer centres (CCCs), in ...
Voir le projet

 29

 TERMINÉ 

Advanced Gratting for Thin Films Solar Cell (AGATHA)

Date du début: 1 sept. 2010, Date de fin: 31 août 2016,

"The minority carrier diffusion lengths are small in polycrystalline or amorphous materials used in thin film solar cells, requiring thin layers to maximize charge collection. This is contradictory for the requirement to maximize solar energy absorption. The optical design consisting in increasing solar cell’s light-trapping capability is of prime importance. In order to provide total internal ref ...
Voir le projet

 6

 TERMINÉ 

Production of Polarized Antiprotons (POLPBAR)

Date du début: 1 mai 2010, Date de fin: 30 avr. 2016,

"Hadrons, the building blocks of all matter in Nature, are not fundamental but composed of quarks and gluons. Up to now we do not know HOW NATURE MAKES HADRONS one of the most important questions of contemporary structure-of-matter physics. Major breakthroughs are to be expected with new experimental facilities such as FAIR. Most studies in hadron physics at HESR/FAIR will employ beams of unpolari ...
Voir le projet

 4

 TERMINÉ 

Research and Civil Society Dialogue towards a low-carbon society (R&DIALOGUE)

Date du début: 1 juin 2012, Date de fin: 30 nov. 2015,

The objective of the R&Dialogue project is to create mechanisms for effectively tackling the scientific and technology related challenges faced by society by proactively bringing together different actors with complementary knowledge and experiences. The Mobilisation and Mutual Learning Action Plan (MMLAP) therefore forges partnerships between research organisations and different societal actors. ...
Voir le projet

 15

 TERMINÉ 

Integrating European Infrastructure to support science and development of Hydrogen- and Fuel Cell Technologies towards European Strategy for Sustainable, Competitive and Secure Energy (H2FC)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,

"The European Strategy Forum on Research Infrastructures (ESFRI) recognizes in its roadmap for Research Infrastructures that ""in the near future, hydrogen, as an energy carrier derived from a number of other fuels, and fuel cells, as energy transformers, are expected to play a major role, for mobile and stationary applications"". With the current fragmentation of the European R&D infrastructures ...
Voir le projet

 20

 TERMINÉ 

Highly Efficient Tubular Membranes for Oxy-Combustion (HETMOC)

Date du début: 1 sept. 2011, Date de fin: 31 août 2015,

This project will develop and demonstrate Highly Efficient Tubular Membranes for OxyCombustion. Oxycombustion is a promising option for implementing cost-efficient carbon capture and sequestration (CCS) in future coal fired power plants. The use of oxygen membranes in the process has the potential to significantly reduce the efficiency losses associated with the capture and to improve the overall ...
Voir le projet

 8

 TERMINÉ 

Working towards Mass Manufactured, Low Cost and Robust SOFC stacks (MMLRC=SOFC)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,

Lightweight SOFC stacks are currently being developed for stationary applications such as residential CHP units, for automotive applications such as APU and for portable devices. They supply electrical efficiencies of up to 60%, a high fuel flexibility, being able to operate on syn-gas from Diesel reforming as well as LPG, methane or hydrogen, and promising costs due to greatly reduced amounts of ...
Voir le projet

 8

 TERMINÉ 

Component Performance-driven Solutions for Long-Term Efficiency Increase in Ultra Supercritical Power Plants - MACPLUS (MACPLUS)

Date du début: 1 janv. 2011, Date de fin: 30 juin 2015,

The intelligent and cost effective use of CCS technologies requires new strategies to increase the net efficiency of coal fired power plants. Among them, the most promising are summarised as below:- Increase working steam temperature and pressure in new USC power plants (350-370 bar, 700/720°C minimum), and hence increase the severity of fireside operating conditions,- Promote clean coal technolog ...
Voir le projet

 26

 TERMINÉ 

Demonstration of 1st European SOFC Truck APU (DESTA)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,

Within the DESTA project the first European SOFC (“Solid Oxide Fuel Cell”) Truck APU (“Auxiliary Power Unit”) will be demonstrated. SOFC technology offers big advantages compared to other fuel cell technologies due to compatibility to conventional road fuels like diesel. Within the last years significant improvements have been made to bring SOFC stack technology and APU BoP components to prototype ...
Voir le projet

 5

 TERMINÉ 

Fuel Cell Based Power Generation (FCGEN)

Date du début: 1 nov. 2011, Date de fin: 31 mai 2015,

For truck applications the increasing demand for electrical power when the vehicle stands still has lead to an increasing need for an on-board electric power generator which operates with high efficiency and very low emissions. A fuel cell based auxiliary power unit (APU), with a diesel fuel processor is regarded as one of the most interesting options since it combines high efficiency, low emissio ...
Voir le projet

 9

 TERMINÉ 

Accelerated development and prototyping of nano-technology-based high-efficiency thin-film silicon solar modules (Fast Track)

Date du début: 1 mars 2012, Date de fin: 28 févr. 2015,

In recent years, the effort in thin-film silicon (TFSi) was made at solving industrialization issues. In 2010, several companies demonstrated 10% stable modules (> 1 m²). The major “bricks” for efficient production are now in place. Next challenges are linked to the fact that TFSi multi-junction devices, allowing for higher efficiency, are complex devices, in which the substrate geometry and each ...
Voir le projet

 25

 TERMINÉ 

Improvements to Integrate High Pressure Alkaline Electrolysers for Electricity/H2 production from Renewable Energies to Balance the Grid (ELYGRID)

Date du début: 1 nov. 2011, Date de fin: 31 déc. 2014,

ELYGRID Project aims at contributing to the reduction of the total cost of hydrogen produced via electrolysis couple to Renewable Energy Sources, mainly wind turbines, and focusing on mega watt size electrolyzes (from 0,5 MW and up). The objectives are to improve the efficiency related to complete system by 20 % (10 % related to the stack, and 10 % electrical conversion) and to reduce costs by 25% ...
Voir le projet

 11

 TERMINÉ 

Study of Strongly Interacting Matter (HADRONPHYSICS3)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2014,

...arly Universe.The Networking Activities are related to the organization of experimental and theoretical collaborative work concerning both ongoing activities at present Research Infrastructures and planned experiments at future facilities.In hadron physics the close interaction between experimentalists and theoreticians is of paramount importance. The Joint Research Activities concentrate on techn ...
Voir le projet

 52

 TERMINÉ 

Dense membranes for efficient oxygen and hydrogen separation (DEMOYS)

Date du début: 1 mai 2010, Date de fin: 31 juil. 2014,

"Membranes for oxygen and hydrogen separation play a key-role in the development of CO2 emission-free coal or natural gas power plants. In addition, cost-effective oxygen and hydrogen production processes are urgently needed in gas supply industry. Today existing membranes, however, are not able to meet the requirements for an economical use because of the high costs in combination with limited pe ...
Voir le projet

 15

 TERMINÉ 

Low Emission Gas Turbine Technology for Hydrogen-rich Syngas (H2-IGCC)

Date du début: 1 nov. 2009, Date de fin: 30 avr. 2014,

The overall objective of this project is to provide and demonstrate technical solutions which will allow the use of state-of-the-art highly efficient, reliable gas turbines in the next generation of IGCC plants, suitable for combusting undiluted hydrogen-rich syngas derived from a pre-combustion CO2 capture process, with high fuel flexibility. The recognised challenge is to operate a stable and co ...
Voir le projet

 25

 TERMINÉ 

"Sulphur, Carbon, and re-Oxidation Tolerant Anodes and Anode Supports for Solid Oxide Fuel Cells" (SCOTAS-SOFC)

Date du début: 1 oct. 2010, Date de fin: 31 déc. 2013,

"The project will demonstrate a new full ceramic SOFC cell with superior robustness as regards to sulphur tolerance, carbon deposition (coking) and re-oxidation (redox resistance). Such a cell mitigates three major failure mechanisms which today have to be addressed at the system level. Having a more robust cell will thus enable the system to be simplified, something of particular importance for s ...
Voir le projet

 5

 TERMINÉ 

Solid Oxide Fuel Cells – Integrating Degradation Effects into Lifetime Prediction Models (SOFC-Life)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2013,

Long-term stable operation of Solid Oxide Fuel Cells (SOFC) is a basic requirement for introducing this technology to the stationary power market. Degradation phenomena limiting the lifetime can be divided into continuous (baseline) and incidental (transient) effects.This project is concerned with understanding the details of the major SOFC continuous degradation effects and developing models that ...
Voir le projet

 13

 TERMINÉ 

Device for prophylaxis and treatment of diabetic foot ulcers for hospital and home use (PreventDFU)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2013,

In PreventDFU, we propose to develop an advanced prototype for prophylaxis and treatment of diabetic foot ulcers (DFUs). This condition contributes to morbidity and loss of Quality of Life (QoL) of Diabetes Mellitus sufferers, most especially the elderly. We propose to develop a unit prototype, based on our proprietary pulsating negative pressure technology that can be used at home or nursing hom ...
Voir le projet

 9

 TERMINÉ 

Anode Sub-System Development & Optimisation for SOFC systems (ASSENT)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,

"The high temperature fuel cell technologies have potential for high electrical efficiency, 45-60%, and total efficiency up to 95%. SOFC has the added benefit of offering commercial applications from 1 kW residential to several MW stationary units with high fuel flexibility. Whilst much effort is devoted to cell and stack issues, less attention has been paid to the components and sub-systems requi ...
Voir le projet

 6

 TERMINÉ 

Evaluating the Performance of Fuel Cells in European Energy Supply Grids (FC-EuroGrid)

Date du début: 1 oct. 2010, Date de fin: 31 déc. 2012,

It has become apparent in the development of the Fuel Cell and Hydrogen Joint Undertaking (FCH JU) Multi Annual Implementation Plan (MAIP) and Annual Implementation Plans (API) that it is difficult to formulate precise targets and requirements for stationary fuel cell applications due to the complicated interaction of FC system operation with grid specifics and the differing goals of FC implementa ...
Voir le projet

 11

 TERMINÉ 

Building Training Programmes for Young Professionals in the Hydrogen and Fuel Cell Field (TrainHy-Prof)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2012,

Fuel Cells and Hydrogen remain new topics to European professionals’ training agenda(s), despite considerable progress in the integration of these subjects into, for instance, university curricula. Especially those professions with less of a basic materials and process engineering orientation will suffer from a lack of information during their academic or vocational training courses (i.e. manufact ...
Voir le projet

 5

 TERMINÉ 

NAnostructured Surface Activated ultra-thin Oxygen Transport Membrane (NASA-OTM)

Date du début: 1 sept. 2009, Date de fin: 31 août 2012,

The main objective of the proposed project is the development and industry-driven evaluation of highly stable and highly oxygen-permeable nano-structured oxygen transport membrane (OTM) assemblies with infinite selectivity for oxygen separation from air. The new approach proposed to reach this objective is the development of ultra thin membrane layers by e.g. CVD, PVD or Sol-Gel techniques with ca ...
Voir le projet

 8

 TERMINÉ 

Efficient and robust fuel cell with novel ceramic proton conducting electrolyte (EFFIPRO)

Date du début: 1 mai 2009, Date de fin: 30 avr. 2012,

"EFFIPRO will develop electrolytes and electrodes for proton conducting fuel cells (PCFCs) based on novel LaNbO4-type and similar proton conducting oxides that, unlike earlier candidates, are chemically stable and mechanically robust. The transport of H+ makes water form on the cathode side, avoiding fuel dilution and recycling and reducing risk of destructive anode oxidation, even at peak power. ...
Voir le projet

 7

 TERMINÉ 

Fusion Energy Materials Science – Coordination Action (FEMaS-CA)

Date du début: 1 oct. 2008, Date de fin: 30 sept. 2011,

The timely availability of qualified materials for use in fusion power reactors is a necessity for the fast deployment of fusion power. 27 European institutions have joined together in the FEMaS-CA to advance fusion materials science in Europe and in close cooperation with EFDA, the European Fusion Development Agreement. The overarching objective of this Coordination Action is: The FEMaS-CA w ...
Voir le projet

 31

 TERMINÉ 

Advanced Cleaning Devices for Production of Green Syngas (GreenSyngas)

Date du début: 1 janv. 2008, Date de fin: 28 févr. 2011,

The transport sector represents a growing share of the total fossil fuel usage in the world. In order to fulfil the commitment to the Kyoto Protocol, the world usage of fossil oil in transport sectors must be reduced. One important approach to achieving this goal is to increase the share of renewable sources such as feedstocks in conversion routes. These biomass conversion routes involve a number ...
Voir le projet

 10