Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 EN COURS 
Municipal solids waste (MSW) are collected by municipalities and represents more than 500 kg/capita (EU-27 average), 300 million tonnes overall every year in the EU-32. Currently, approximately 50% of this volume is landfilled. More than 1.3 million tonnes of Marine rest raw material (MRRM) are generated in Europe each year. Some countries, such as Norway and Denmark, have traditionally for anima ...
Voir le projet

 17

 TERMINÉ 
Approximately one third of all food produced globally is wasted every year throughout the whole value chain-from farmers to consumers. To extract the significant amounts of valuable compounds contained in these wastes, AgriMax will combine affordable and flexible processing technologies (ultrasound assisted and solvent extraction, filtration, thermal and enzymatic treatments) for the valorization ...
Voir le projet

 30

 TERMINÉ 
Global warming resulting from the emission of greenhouse gases has received widespread attention with international action from governments and industries, including a number of collaborative programs, such as SET-Plan, and very recently the International Climate Change hold 2015 in Paris. Key European Commission roadmaps towards 2030 and 2050 have identified Carbon Capture and Storage (CCS) as a ...
Voir le projet

 10

 TERMINÉ 
According to European Commission, 13.1 million tons of poultry meat was produced only in the European Union (EU-28) in 2014 with an estimated generation of 3.1 million tons feather waste. At present the majority of poultry feathers are converted into low nutritional value animal food or disposed in landfills, causing environmental and health hazards. In this context, the overall objective of KaRMA ...
Voir le projet

 19

 TERMINÉ 
URBANREC project aims to develop and implement an eco-innovative and integral bulky waste management system (enhancing prevention, improving logistics and allowing new waste treatments to obtain high added value recycled products) and demonstrate its effectiveness in different regions. In URBANREC project, Northern, Mediterranean, Eastern and South-eastern areas in Europe are represented by Belgiu ...
Voir le projet

 22

 TERMINÉ 
... menich); ii) two chemical SMEs producing HMF and chiral APIs (AVA-Biochem and Chiracon); iii) two specialized biotechnology SMEs (JenaBios and CLEA); iv) one technology centre in the Plastics sector (AIMPLAS); and v) three CSIC institutes and two universities (Dresden and Delft) with expertise in enzyme reactions and bioprocess implementation.
Voir le projet

 11

 TERMINÉ 
Background According to Plastics Europe 9.6 million tonnes of post-consumer plastic waste was disposed in European landfills in 2012. This number accounts for 38.1% of the total post-consumer plastic waste generated. Depositing plastic in landfills is a very inefficient use of resources. Though the trend in recent years has been for less landfilled plasti ...
Voir le projet

 5

 TERMINÉ 

INDUSTRIALIZATION OF BIOBASED TEXTILE FABRICS FOR CLOTHING APPLICATIONS (FIBFAB)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2018,

FIBFAB project aims to industrialize and launch successfully the production of biodegradable and sustainable polylactic acid (PLA) based fabrics (wool/PLA and cotton/PLA) for the applications in casual (men and womenswear), protective and workwear clothing, and to overcome current limitations of PLA fibres as real alternative to current fabrics (wool and cotton with polyester fibres).Main FIBFAB p ...
Voir le projet

 6

 TERMINÉ 
The aim of JOSPEL project is the development of a novel energy efficient climate system for the optimization of interior temperature control management in electrical vehicles through an integrated approach that combines the application of the thermoelectric Joule and Peltier effect, the development of an efficient insulation of the vehicle interior, the energy recovery from heat zones, battery li ...
Voir le projet

 15

 TERMINÉ 
Background Green Public Procurement (GPP) is an important instrument to accomplish the general goal of sustainable development, since it enables public authorities to address current challenges relating to legislation and sustainability. GPP criteria can contribute to reductions in energy consumption, greenhouse gases and waste production, and can promote ...
Voir le projet

 6

 TERMINÉ 
The existing 2nd generation biorefineries utilize less than 20% of the biomass feedstock for ethanol production, and major side-streams are produced such as pentose and lignin waste streams, that are respectively used for biogas and energy production. Converting the carbon from these waste streams into added-value products would increase the otherwise low profitability and improve the environmenta ...
Voir le projet

 9

 TERMINÉ 
Background Ecosystems are becoming degraded as a result of the exhaustive use of non-renewable resources such as petrochemical-based polymers. The environmental impact of long-lasting plastic waste is a growing global concern. Solutions such as incineration produce significant greenhouse gas emissions. Petrol-based plastics are mostly used in packaging (f ...
Voir le projet

 4

 TERMINÉ 
Background The pine processionary (Thaumetopoea pityocampa) and pine tree lappet (Dendrolimus pini) are moths of the families Thaumetopoeidae and Lasiocampidae. They are abundant species found in pine woods in north, central and southern Europe. Because their larvae, or caterpillars, feed on the needles of pine trees and some other conifer tree species, t ...
Voir le projet

 7

 TERMINÉ 
Indoor Air Quality and emissions from building materials have been over the last decades a major challenge for scientists, industry and consumers. Traditional construction materials contribute to contaminants such as VOCs, formaldehyde, particulates and fibres. However, new eco-innovative building materials are able to provide a healthier indoor environment both by substituting source of contamina ...
Voir le projet

 22

 TERMINÉ 
BISIGODOS aims to address the production of valuable algae derived chemicals, amino acids and high added-value bio-resins for coatings, printing, food and hair care and adhesives applications, starting from algae biomass fed directly with CO2 from industrial emissions (cement, steel factory, thermal power plants, etc.) as a raw material that is cost-effective and renewable. The process is assisted ...
Voir le projet

 18

 TERMINÉ 
"The main objective of NATURTRUCK is to develop injected plastic parts for the commercial vehicles industry (mainly cabin truck parts) made with thermoplastic composite materials from renewable resources (at least 80% w/w), namely physically modified polylactic acid (PLA) grades and natural fibres, with improved thermal and flame retardancy properties and high quality surface finishing to be used ...
Voir le projet

 14

 TERMINÉ 
"COALINE will develop a in-line clean one-stage process, which is free of VOCs and small particles emissions, able to produce properly coated composite pultruded profiles by means of the development of the sensing technology, advanced mould design and microwave aided curing needed to foster an improved composite – coating adhesion with a reduced labor and process cost. COALINE profiles will be joi ...
Voir le projet

 14

 TERMINÉ 
The production and installation of resilient flooring in public and private buildings is a major business in Europe involving various sectors including material and coating production, designers, architects, installers, cleaners as well as the end-users. The main requirements are: durability, ease of installation, optical appearance, ease of cleaning and low cost maintenance.On the other hand slip ...
Voir le projet

 14

 TERMINÉ 
"Electrical and electronic (EE) applications – including housings, wire and cable, and internals such as connectors– are the largest market for flame retardants (FR) in plastics globally. The need for flame retardancy is increasing due to electronics miniaturization and higher temperatures in both processing and use. PHOENIX project is an ambitious multidisciplinary innovative threefold approach t ...
Voir le projet

 16

 TERMINÉ 
The principal objective of the HiPerDry project is to create a significant advance over the state of the art in hygroscopic polymer drying technology. A three year development programme which will culminate in the testing and demonstration of a prototype hygroscopic polymer drying system is proposed. The resulting combined microwave and super-heated steam drying (MW-SHSD) system will boast the fol ...
Voir le projet

 12

 TERMINÉ 
The proposed project aims to the development of an ecological and innovative coating for composite parts which may be able to eliminate the styrene emissions from the workplace. Additionally, this type of coating will deliver improved production perfomance in terms of quality and dramatic reduction of associated operational costs which currently burden the progress of composite materials worldwide ...
Voir le projet

 16

 TERMINÉ 
BRIGIT aims to develop a cost-competitive and environmentally friendly continuous process to produce biopolymers (polyhydroxybutyrate, PHB, and succinate-based biopolyesters, PBS-Poly-Butylene-Succinate) from waste-derived lignocelullosic sugar feedstock liquor of wood sulphite pulping process based on “in-situ” fermentation process and new fermentation culture technology without alteration of the ...
Voir le projet

 17

 TERMINÉ 
BANUS project aims to develop new multilayer structures for food packaging applications, in order to evaluate their properties as functional barriers, using conventional polymers to achieve new functionalities and open new potential markets for the traditional recycling companies in Europe.Taking into account that the main objective of the project is to guarantee the suitability of the developed f ...
Voir le projet

 11

 TERMINÉ 
The demand for biobased polymers is growing fast. According to the current state of the art, metal-containing catalysts are needed to improve the polymerisation rate of lactones, posing a hazard to health and the environment. InnoREX will develop a novel reactor concept using alternative energies for the continuous, highly precise, metal-free polymerisation of PLA.In InnoREX, metal-containing cata ...
Voir le projet

 13

 TERMINÉ 

Biodegradable solutions for packaging of liquid dairy products (BIOBOTTLE)

Date du début: 1 mai 2014, Date de fin: 30 avr. 2016,

This research proposal intends to develop innovative plastic bottles and bags manufactured in biodegradable materials that fulfil the requirements for packaging of different types of dairy products.One of the main drawbacks for the wide application of biodegradable materials currently available on the market in certain applications is their thermal resistance, in comparison with traditional plasti ...
Voir le projet

 9

 TERMINÉ 
This research proposal deals with the development of innovative fully biodegradable and recyclable, multilayer flexible and transparent structure for fresh pasta and different types of cheese that requires customized Modified Atmosphere (MAP) by combining at least two different biodegradable thermoplastic materials, mainly polylactic acid (PLA) and polyvinyl alcohol (PVOH). In order to increase/re ...
Voir le projet

 12

 TERMINÉ 
The EU fruit juice and nectars market stood at a healthy 11.3 billion litres in 2009. A 60% of total volume consumed is packaged with carton, a 25% with PET and the remainder is packaged with glass (13%) and other packaging formats (2%).Environmental sustainability concerns are rising on the public agenda, becoming even more relevant to the consumers.The EU juice and nectars industry is aware of i ...
Voir le projet

 13

 TERMINÉ 
XXL-REFRESH is built upon the results obtained by the REFRESH project (GA 262494), in which the project team demonstrated the feasibility of transportation of large quantities of fresh water by the sea using modular flexible barges. The key innovation introduced by REFRESH is the use of open modular textile containers connected by extra-strong watertight zips and the use of an online monitoring sy ...
Voir le projet

 8

 TERMINÉ 
The aims of the NanoMaster project are to reduce the amount of plastic used to make a component by 50% and hence reduce component weight by 50%, at the same time as imparting electrical and thermal functionality. This will be achieved by developing the next generation of graphene-reinforced nano-intermediate that can be used in existing high-throughput plastic component production processes.Graphe ...
Voir le projet

 14

 TERMINÉ 
"The main objective of the research project is to manufacture textile substrates (woven or non-woven) for vehicle interiors from renewable resource-based synthetic fibres from Polylactic Acid derivatives that can be used as a substitute for the polyester fibres that are currently used. These biofibres must fulfil the same requirements that the fibres used at the moment including thermal resistance ...
Voir le projet

 10

 TERMINÉ 
The main goal of SAMDOKAN project is to industrialize a novel hexavalent chrome Cr(VI) free environmentally friendly high performance electroplating pre-treatment for plastic surfaces using molecular self assembly nanotechnology (SAM).Sectors such as automotive, white goods electric-appliances and sanitary are the main consumers of this type of plastic parts. In Europe, about 1350 companies have c ...
Voir le projet

 5

 TERMINÉ 
"The SME-driven NanoOnSpect project aims to accelerate the commercialisation of innovative polymer nanocomposites (PNCs), combining developments in online sensor technology, artificial intelligence-based signal analysis and real-time process optimisation to create a comprehensive solution to quality problems.NanoOnSpect has 3 development aims:1) Newly-developed online characterisation techniques w ...
Voir le projet

 13

 TERMINÉ 
Le projet CARBONINSPIRED 2.0 constitue la continuité du projet CARBONINSPIRED approuvé dans le cadre du deuxième appel à projets.CARBONINSPIRED 2.0 regroupe le même partenariat qui a constitué un réseau de coopération et de transfert de connaissance concernant les nanotechnologies appliquées aux secteurs de la construction etl'automobile. À travers CARBONINSPIRED 2.0, le partenariat vise à garanti ...
Voir le projet

 5

 TERMINÉ 
The project aims to develop a new cost-competitive and environmentally friendly bionanocomposite material based on the combination of a polyhydroxybutyrate (PHB) matrix with new chemical, structure produced by new fermentation culture technology with two types of nanofibres,cellulose whiskers and lignin-based, in order to have a true alternative to engineering materials in two main sectors: househ ...
Voir le projet

 15

 TERMINÉ 
The main objective of the project is the development of new biomass-based composites validated for the automotive industry by means of the adaptation of base biopolymers and the generation of new ones, using innovative treatments for fibre reinforcements and the additivation of the base polymer with novel fillers and nanofillers. The principal research line will be focused on the adaptation of ava ...
Voir le projet

 13

 TERMINÉ 
"The EU is currently directing intensive research efforts into nanotechnology. Carbon Nanotubes (CNTs), with the electrical conductivity of copper and an E-modulus 10 times greater than steel, are one of the most promising developments, enabling the creation of materials with revolutionary characteristics. The commercial potential is huge, but only a fraction of the possible applications have reac ...
Voir le projet

 14

 TERMINÉ 

Microwave Assisted Curing for Resin Transfer Moulding (MAC-RTM)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2013,

"MAC-RTM project aims to develop an alternative highly innovative microwave-assisted curing (MAC) technology for thermoset materials with improved flexibility and more cost and energy effective than current curing technologies.The MAC technology will be developed and adapted to the Resin Transfer Moulding (RTM) and RTM-Light industries for composites production.The challenging MAC-RTM technology w ...
Voir le projet

 10

 TERMINÉ 

Microwave assisted curing for carbon fiber reinforced epoxy composites (WAVECOM)

Date du début: 1 sept. 2012, Date de fin: 30 juin 2013,

"The main objective of WAVECOM project is the development of a technology suitable for carbon fiber reinforced composites manufacturing based on microwave curing of its raw materials, which includes the selection of the proper additives (dipole organic molecules or nanostructured magnetic materials) and the set up of the system at pilot plant level. A better understanding of potential distortions ...
Voir le projet

 2

 TERMINÉ 
"Fresh Cut Products category refers to fresh vegetables, fruit and market garden products without thermal treatment, prepared, washed and packaged without the incorporation of additives or preservatives and, as an essential requirement, demands the maintenance of the cold chain for its perfect conservation and has a shelf life of approximately 7 days. PLA4FOOD proposal deals with the development o ...
Voir le projet

 10

 TERMINÉ 
"This project aims to promote the “valuable recycling resource” concept for industrial painted and laminated packages (injected parts and extruded films), nowadays considered as a problem, promoting their recycling in the original application (closed loop cycle) and minimizing the environmental risks and impacts. The CLIPP Recycling System for printed and laminated plastic fraction, will contribut ...
Voir le projet

 10